Getting Started with GLX-D Digital Wireless – Part 3: Adjusting Gain

Setting the gain has never been easier with audio levels and gain settings visible on the receiver’s display.  “OL” indicates that the gain needs to be reduced – a simple matter of using the system’s gain buttons to increase or decrease the gain.  This short video shows you how.

More GLX-D Digital Wireless Videos

Part 1 – Basic Setup
Part 2 – (Pedal) Basic Setup
Part 3 – Adjust Gain
Part 4 – Reset the System
Part 5 – Scan and Frequency Change
Part 6 – Use the Link Function
Part 7 – Use the Lock/Unlock Feature

For a deeper dive into the functionality of your GLX-D system, check out the following short videos:

GLX-D Digital Wireless: How It Detects and Avoids Interference
GLX-D Digital Wireless: How To Optimize Your System

Subscribe here
Davida Rochman

Davida Rochman

A Shure associate since 1979, Davida Rochman graduated with a degree in Speech Communications and never imagined that her first post-college job would result in a lifelong career that had her marketing microphones rather than speaking into them. Today, Davida is a Communications Manager, lending her skills to a wide spectrum of activities, from public relations and social media to content development and sponsorships.

Show Comments (2)

Leave a Reply

Your email address will not be published.


  • Todd McCool says:

    I have the glx tuner and also bought the rackmount version because I was told that I could use both packs for either system however I’ve found that the transmitter pack for the rack version distorts . Is there a gain adjustment on the pack? Because one pack is just fine

    • Rebecca Senft says:

      Hi, Todd. There is no gain adjustment on the pack itself. One thing would be to make sure that the system gain on the receiver (GLXD4 or GLXD6) is not set too high – in most cases, keep it set at something close to 0 dB. Our customer service team would be happy to advise you further on what may be causing the distortion. Please contact them at

Short URL