Fans of metal will know that recent circumstances involving Lamb Of God frontman Randy Blythe had led to the cancelation of their highly anticipated tour.  It wasn’t just Lamb Of God that had people excited; the line-up was to include the live version of Dethklok, the animated band from Adult Swim’s Metalocalypse, and Gojira, one of the best up-and-coming metal bands in the world.  I’m a bit opinionated when I say this, of course.  They’re new Shure endorsers.

Gojira are not exactly a new band.  They originally formed in the mid-1990s under the name Godzilla, changing it in 2001.  Their star has been rising for years, gaining fans globally over time.  With the release of L’Enfant Sauvage this Summer, big things seem to be ahead.  The unfortunate cancellation of the LoG/Dethklok/Gojira tour is bad timing.  However, they wasted no time in booking a smaller run upon receiving the bad news.  I got a call asking about borrowing some wireless – UHF-R – for the make-up dates here in the States.  I also got the good news that they’d be coming to Chicago to play at the Bottom Lounge.  Score.

I made my way to the venue last Thursday to meet up with Paul Natkin, our photographer, so we could shoot some posed shots and a bit of the sound check before the show.  It was my first time meeting anyone from the band beyond a voice on the phone.  We called up the tour manager, Taylor, who ran out to get us.  As soon as we were inside he introduced us to brothers Joe and Mario Duplantier (guitar/vocals and drums, respectively).  The two guys were warm and welcoming – always a good sign when meeting endorsers for the first time.  We chatted about the gear they were using since the onset of their endorsement deal for a bit before lead guitarist Christian Andreu came over.  Bassist Jean-Michel Labadie eventually joined us and we made our way outside to shoot some posed photos against the backdrop of Chicago’s El tracks.  Fans had been around the venue doors noticed us and gave a rousing cheer.  The guys were gracious in acknowledging them – a good sign for career longevity in this day and age.

We sat inside for sound check as the band’s FOH engineer meticulously ran through each channel.  Paul snapped a few pics as I checked out their wireless set-ups, looking to make sure there was no RF overload on the receivers.  They are using SM58 for vocals, SM57s for the cabinets, SM81s on the cymbals and hats, and the instrument wireless (as mentioned above) was our UHF-R.  The band wrapped up and Paul and I made our way to the venue’s restaurant for some digs.  As we ate I noticed the restaurant portion was considerably more crowded than I had anticipated.  I had suspected that the show might not have done as well as all would have liked; they did manage to book it only days prior.  We finished up and went in to the venue to listen to opener Car Bomb, a grindcore/mathcore band from NY.  The room was fairly full at this point.  My initial suspicion about attendance was definitely wrong.

By the time Gojira took the stage it was getting difficult to move around.  I found myself considerably closer to the pit than I had been in years, though I didn’t mind as much as someone wearing glasses probably should.  The band started; people bumped their way past me in a rush to get to the pit; the room erupted in raised fists and horned hands.

“I was in the crowd for Car Bomb.  I love those guys.  Anyway, I noticed something – it looks like a lot of guys here are in their thirties.  Is that true?”  Joe asked.  “How many people own a car?”  Hands around me go up.  “How many people have a mortgage?”  Similar show of hands.  “It’s all the people in the back!  How about the kids?  Are there kids here?!?”  The entire front half of the audience erupted in cheers.  Yeah, OK, I’m not as young as I once was.  But I find consolation in the fact that there were plenty of young fans up front for a band like this.

Here’s hoping for a return to Chicago in the early part of 2013.  I’m looking forward to interviewing them.

Richard

@Richard_ShureAR

Here’s a rudimentary primer for miking the rhythm section: guitars, bass, piano, and drums.

This quick overview should help minimize the deer-in-the-headlights feeling you may experience when faced with a daunting live-sound situation – like when you put up an open mic on a stage peppered with monitors, only to elicit the screeching howl of the dreaded feedback monster.

Start with the Right Mics

The best way to figure out where to place a mic is to listen to the source – in this case, the instrument or amplifier. Try using only one ear to simulate the mono pickup of a mic, and listen up close and also from a few feet away. How does the instrument radiate sound? Put the mic where the instrument sounds best to your ear. Sometimes two mics are necessary to capture the full range of a particular instrument.

You’ll always need to use unidirectional microphones in live situations, for isolation of sound sources and to avoid feedback problems with the monitors.

If you have problems with the monitors, mics with a tighter pickup pattern (hypercardioid or supercardioid) are best. For area miking (that is, drum overheads), you can use a transducer with a wider pickup pattern. In most circumstances, you will want to put the mic as close to the instrument as possible without interfering with the player’s range of motion. This will ensure a more focused sound with less ambient reverberation and bleed from the other instruments onstage.

The Match Game

Mics have different frequency response characteristics that make them more or less appropriate for specific applications. Analyze the quality of an instrument’s sound to decide which mic best suits the job.

If the instrument is soft, a tight-pattern condenser might be just the thing for getting a hotter output.

If the instrument is loud, choose a mic that can handle high SPLs.

Is it bright? Try a mic that will impart a little warmth.

Does it have lots of midrange? Perhaps a Shure SM57 would be a good match.

Does it sound bassy? Try a large-diaphragm dynamic to capture the lows fully.

Guitars

Electric guitars

The electric guitar is perhaps the simplest instrument to mic, given that an instrument mic aimed at the amp’s speaker always does the job well.

There are two primary schools of thought for miking a guitar cabinet. Either point the microphone straight into the cabinet and directly at the speaker’s voice coil (the advantage being consistency of sound), or put the mic on the edge of the speaker and angle it into the voice coil (for less spiky mids). In both cases, you should place the mic right up against the grille.

Consider this type: Unidirectional dynamic microphone

Shure mic: PG57, SM57

Acoustic guitars

Any condenser microphone works well for miking an acoustic guitar, as long as the stage sound isn’t too cluttered or loud. If the volume is cranked up and the guitar needs to go through the monitors, you may prefer a dynamic mic with good high-end response to get sufficient gain before feedback.

If the guitarist has a pickup, try taking it direct. If the sound is too dry and the guitarist is using a lot of effects or EQ at the amp, you may need to mic the amp, using the same approach as for miking an electric guitar amp, and combine that sound with the direct signal. You could also mic the guitar itself and blend that with the direct signal for a fuller sound.

Consider this type: Condenser or unidirectional dynamic microphone
Shure mic: PG81, SM57, KSM32

Electric or Acoustic Bass

Electric Bass

Although it’s standard practice to send the bass direct through the P.A., in some circumstances an engineer will also mic the bass cabinet. The mic you choose should capture lots of low end. Large-diaphragm dynamics are good choices.

If the bass cabinet has a mix of 10-inch and 15-inch speakers, you have a couple of options. For more low-end oomph, put a mic on the 15-inch speaker. If you’re a funky slap-and-pop bass player, try putting a mic on one of the 10-inchers or on the horn for more high-end definition and better transient response. Keep in mind that the direct injection (DI) box will give you plenty of low-end fundamentals and that extra twang, so a little lower midrange support from a miked cabinet can fill out the sound.

Consider this type: Unidirectional dynamic microphone
Shure mic: PG52, SM57, Beta 52®A

Acoustic upright bass

It is desirable to take a direct signal from an acoustic bass pickup, though most double-bass players (especially jazz cats) wrinkle their noses at DIs because they never sound the way players like them to sound. In such a case, you should also mic the bass. It’s prudent to retain the option to use the direct sound, however, because in a loud situation where you may not get enough gain or definition from the mic, you can still boost the level to give the bass presence in the mix.

The output of an acoustic bass is relatively low, so you have to put the mic in as close as possible. Unidirectional mics are prone to proximity effect (a boost in the low frequencies) when placed very close to a sound source, so you may need to roll off some of the lows. You can fasten low-profile microphones to the tailpiece, to an f hole, or to the ridge that’s just above the waist of the instrument. Don’t clip them on the bridge – that can inhibit vibrations.

Consider this type: Condenser microphones – cardioid instrument and gooseneck types
Shure mic: KSM32, KSM44, KSM137, KSM141, Beta 98H/C

Keyboards

Electronic Keyboards

Most engineers prefer to get a direct feed on electronic keyboards. If the keyboardist has an amp and prefers that sound, you can mic the cabinet (as you would a guitar amp with a Shure SM57) and combine that sound with the direct signal.

Going direct or using a direct box is generally better, because you tend to get a cleaner sound. In the case of a Fender Rhodes suitcase piano, try going direct and miking the speakers on the piano to represent the Fender Rhodes sound fully.

Consider this type: Dynamic instrument microphone
Shure mic: SM57

Grand Piano

For miking grand pianos, engineers often favor condenser mics. Ideally, you should use a pair of mics to capture the low and high strings Place one mic several inches over the bass strings and the other over the high strings, and angle them apart for greater separation. The closer you get to the hammers, the more attack you’ll get; the farther away from the hammers, the mellower the tone will be.

If the environment is loud, try securing the mics inside the piano and closing the lid for greater isolation. You could also clamp the mics to the soundboard (using a piece of foam to protect the wood) with LP Claws or similar mic clamps. A single SM58 pointing into one of the soundboard holes will also do the trick if you have only one input and the piano is going through the monitors.

Consider this type: Condenser instrument microphone
Shure mic: PG81, SM81, KSM44

Upright Piano

Open the top and place a split pair of microphones inside, aiming slightly toward the hammers to capture both the low and the high keys. Condensers are preferable, but SM57s work quite well, too. You could also mic the piano from the back, taking time to find the sweet spot. Remember to listen – and to think from the mic’s perspective. Another option is to take the front off by the player’s feet and to mic the strings from that angle (if the player isn’t stomping the pedals or the floor too vigorously, that is!).

Consider this type: Condenser instrument microphone, dynamic instrument microphone
Shure mic: PG81 , SM57, KSM44

Drums

Drum sets vary in size, number of components, tonal quality, and head configurations. But most standard kits have a snare drum, a bass drum, a floor tom, one or more rack toms, a hi-hat, a ride cymbal, and a crash or two.

Snare Drums

A fat but crisp sound is desirable for snare drum, and a Shure SM57 is the workhorse for capturing this essence. A Beta 58A® can also sound very good on snare.

Place the mic at about 11 o’clock from the player’s perspective, between the hi-hat and the rack tom, about two inches from the head and angled toward it.

For more lows, angle the capsule closer in toward the head; for a crisper attack, move the mic slightly farther from the head and point it more toward the center of the drum.

If you want to get some extra sizzle from the snare wires for a funky sound, put an additional mic on the bottom head, pointing up at the wires. Use a dynamic that has a lot of high end and flip the phase of the mic on the bottom head to avoid phase cancellation.

Consider this type: Dynamic microphone
Shure mic: PG57, SM57, Beta 58A®

Kick Drums

A punchy kick-drum sound with a lot of low-end oomph makes the rest of the band really pump. Quite a few mics are designed specifically for kick-drum miking, including the Shure Beta 52®A.

Usually a kick drum will have a hole in the front head. Put the mic just inside the drum to start. For more attack, move the mic closer inside and aim it at the beater. For a fuller, rounder sound with less attack, draw the mic back farther and angle it slightly away from the beater. If there is no hole in the front head, start with the mic about two to four inches in from the rim and point it at the head, adjusting the angle to get the desired sound. Listen up close to the drum with one ear as someone plays, find the spot where it sounds the way you like, and put the mic there. Refrain from placing the mic at the very center of the drum – that’s a dead spot.

Consider this type: Kick drum microphone – dynamic or condenser
Shure mic: PG52, Beta 52®A, Beta 91

Toms

Miking toms can pose a challenge if a drummer has a lot of cymbal stands. Fortunately, you have the option of clip-on tom mics well as mic- that come in handy for fastening tom mics in place and neatly out of the way. Place the mic near the rim of the drum, pointing down at the head, and adjust the angle and distance for more low end or more attack. If you want greater separation, angle the mics apart.

Consider this type: Dynamic or condenser microphone
Shure mic: PG56, SM57, Beta 98AD/C

Hi-Hat and Cymbals

The use of overhead mics is standard for capturing the cymbals and the overall kit sound, and a split pair will pick up both sides of the kit. Condenser mics are ideal for overheads because of their excellent high end and natural transient response.

If you have only one overhead, place the mic centrally over the kit, and move it around to compensate for the playing style and the kit’s characteristics (that is, quiet ride cymbal, loud snare, and so on). Just keep the overheads out of the monitors to avoid feedback. If the hi-hat needs more bite, place a small-diaphragm condenser mic a few inches above the hi-hats, angled at the area just below the cup.

Consider this type: Condenser microphone
Shure mic: PG81, SM81

Finally…

Miking stage instruments is a subjective art, and there are nearly as many opinions as there are engineers. By now, though, you’ve picked up enough pointers to start miking the most ubiquitous instruments in standard venues.

If you have some time and the luxury of access to a variety of live-sound mics, the next step is to experiment a little with selection and placement before you have a show.

Keep in mind the constants – namely, the proper etiquette for avoiding feedback, and close miking with unidirectional mics for maximum pickup and isolation. Use this article as a guide, but remember: ultimately you should rely on your ears to determine the best mic placement for optimum sound.

About Karen Stackpole

Karen Stackpole got started in live sound reinforcement in 1988 and expanded into studio work in 1991. In 1997 she launched Stray Dog Recording Services, a mobile recording business, in addition to working on projects as a freelance live sound and studio engineer and drum tech.

Karen is an active member of Syn-Aud-Con and the Audio Engineering Society and is also a performing and recording drummer/percussionist. As a freelance writer she regularly contributes to Electronic Musician and DRUM! Magazines. In 1999 she joined the Sound Arts faculty at Expression College for Digital Arts and directs the Studio Maintenance course.

Visit Karen and Stray Dog Recording Services on MySpace .

SN thanks Karen and Electronic Musician magazine for allowing us to adapt the content that appears in this article.